{"product_id":"muc-off-no-puncture-hassle-tubeless-sealant-500-ml","title":"No Puncture Hassle Tubeless Sealant","description":"\u003cp\u003eLooking for a super lightweight but badass tubeless sealant? Boom, you've just found it my friend! No Puncture Hassle Tubeless Sealant performs under the most brutal race conditions. The cutting-edge molecules fill the bigger holes and tears, whilst the advanced latex forms a strong seal instantly. Our formula also contains a unique UV detection system that highlights any punctures you haven’t seen during your ride.\u003c\/p\u003e\n\u003cp\u003eDeveloped with the world's top downhillers and pro peloton teams, to give you the finest tyre sealant available. It's non-corrosive and easily washes off with water. Compatible with tubeless ready and full UST wheels\/tyres, No Puncture Hassle Tubeless Sealant works from 15psi - 80 psi and temperatures from -20°C to +50°C. Our pouch is designed to fit your Presta valve perfectly and is ideal to add to your toolkit or ride pack for emergency top-ups on the go!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul id=\"isPasted\"\u003e\n\u003cli\u003eFor Downhill\/Enduro\/\/MTB\u003c\/li\u003e\n\u003cli\u003eSeals tears and holes up to 6mm\u003c\/li\u003e\n\u003cli\u003eSeals porous tyres and bead\/rim gaps\u003c\/li\u003e\n\u003cli\u003eLasts up to 6+ months in temperate climates* and won't ball up\u003c\/li\u003e\n\u003cli\u003eContains cutting-edge molecules to fill large holes and tears\u003c\/li\u003e\n\u003cli\u003eIncludes unique UV detection system that highlights any punctures\u003c\/li\u003e\n\u003cli\u003eNon-corrosive and easy to wash off with water\u003c\/li\u003e\n\u003cli\u003eAmmonia free\u003c\/li\u003e\n\u003cli\u003eCO2 compatible\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eMinimum amount per tyre:\u003c\/h4\u003e\n\u003cp\u003e(add up to 30ml extra for increased protection)\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e26\" MTB \u0026amp; 27.5\": 60-75ml (4 to 5 scoops)\u003c\/li\u003e\n\u003cli\u003eCross 700c: 60-75ml (4 to 5 scoops)\u003c\/li\u003e\n\u003cli\u003e29\" MTB: 105ml-140ml (7 or the whole pouch)\u003c\/li\u003e\n\u003cli\u003eDownhill: 120-140ml (8 or the whole pouch)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e*If using in extreme heat (+35°C) simply top up if needed.\u003c\/p\u003e\n\u003ch3\u003eHow To\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eRemove all old rim strip or tape and clean rim.\u003c\/li\u003e\n\u003cli\u003eMake sure the rim is clean and dry before applying tape.\u003c\/li\u003e\n\u003cli\u003eGet the tape from the packet and line it up from the opposite side of the valve.\u003c\/li\u003e\n\u003cli\u003eStart by unwinding a small amount of the tape and pressing it down using your thumb or finger to hold the pressure down.\u003c\/li\u003e\n\u003cli\u003eContinue to hold while you pull back on the tape and stick down tight once you have a few cm on the tape will stick and holding is no longer needed.\u003c\/li\u003e\n\u003cli\u003eContinue the entire way around the rim (if it has a big concave in you can pull and wiggle the tape to fill any edges)\u003c\/li\u003e\n\u003cli\u003eOverlap the tape by roughly 10 – 15cm\u003c\/li\u003e\n\u003cli\u003eLeave a small amount unstuck so that you can cut the remainder off\u003c\/li\u003e\n\u003cli\u003eOnce cut sketch and pull the tape down to create a seal\u003c\/li\u003e\n\u003cli\u003eGo around the rim with your thumb to make sure there is no air pockets or messed areas.\u003c\/li\u003e\n\u003cli\u003eOnce you're happy with how it looks using a small pin locate the valve hole and cleanly pierce the tape ready for the valve\u003c\/li\u003e\n\u003cli\u003eGrab your tubeless valve and remove the lock ring and o ring\u003c\/li\u003e\n\u003cli\u003eChose the right rubber fitment for your rim tape and insert valve into rim\u003c\/li\u003e\n\u003cli\u003eRefit O-ring and Lock ring making sure you lock the valve in (don’t go too tight or could damage the rubber)\u003c\/li\u003e\n\u003cli\u003eRe-fit your tyre of choice, being careful not to damage the tape (by using tyre levers etc)\u003c\/li\u003e\n\u003cli\u003eInflate tyre to create a fit (should hear some popping around the rim)\u003c\/li\u003e\n\u003cli\u003eRelease Air and remove valve core using the spare valve cap\u003c\/li\u003e\n\u003cli\u003eGrab the sealant pouch and give it a shake\u003c\/li\u003e\n\u003cli\u003eUnscrew the cap and fit on the valve in a upright position\u003c\/li\u003e\n\u003cli\u003eWhile holding the pouch spin the wheel downward so that the pouch is now upside down\u003c\/li\u003e\n\u003cli\u003eInsert the sealant by rolling the pouch down\u003c\/li\u003e\n\u003cli\u003eSpin wheel back up right and remove pouch\u003c\/li\u003e\n\u003cli\u003eReinsert valve core and inflate to your pressure\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Muc-Off","offers":[{"title":"500ml","offer_id":48892293021924,"sku":"210000131322","price":30.99,"currency_code":"CAD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0607\/5590\/2692\/files\/500ml_MTB_Sealant_1000x1000_ece9ba77-0a6b-40cb-9a48-3cb5608c4fa8.webp?v=1778270061","url":"https:\/\/mudsweatandgears.ca\/fr\/products\/muc-off-no-puncture-hassle-tubeless-sealant-500-ml","provider":"Mud Sweat and Gears","version":"1.0","type":"link"}